CellPhone Operated Landrover

Coming SOON >........................................

Serial AVR ISP ( In System Programmer) Simple

My Prototype

This is a very simple and easy to build programmer for Atmel microcontrollers from AVR family. The microcontrollers must support serial programming. This programmer is connected to a PC through the RS232 serial interface and can be used with the PonyProg.

Description of the serial programmer

The programmer is quite simple and it is based on the SI-Prog from the author of PonyProg software. The Zener diodes D2, D3 with the resistors R2, R3 reduce the voltage from the ouput pins DTR, RTS on the serial port to around 5V which is suitable for microcontroller (MOSI, SCK). MISO signal is connected directly to the input CTS pin. The Zener diode D1 with the resistor R1 drive the NPN transistor T1, which controls RESET signal. The AVR microcontrollers are in reset when the signal has low level. The resistor R5 works as a pull-up for reset signal. The resistor R4 helps to close the transistor T1. The programmer has standard 10 pins header.

  

Using PonyProg 2000

PonyProg I/O Port Setting

When you want to program your microcontroller with the PonnyProg2000 you have to setup the program as you can see on the following picture. You have to select chosen COM port, where is connected your programmer.

Circuit Schematic

Schematic of the serial programmer

If you Wanna Buy it From Me then Just Leave me a mail.

And if wanna do it yourself and if need any PCB layout File Or any Query Just feel Free to Ask me 

Thank you

Regards,

Ganesh Kashid

maxtechnologies.mumbai@gmail.com

www.max-technologies.webs.com

 

When Love and Skill Work together, expect a masterpiece.

When Love and Skill Work together, expect a masterpiece.